Loading...

OPEN REEF - ΤΟ ΕΙΔΙΚΟ ΦΟΡΟΥΜ ΓΙΑ ΕΝΥΔΡΕΙΑ ΥΦΑΛΩΝ

ΘΑΛΑΣΣΙΝΑ ΕΝΥΔΡΕΙΑ, ΚΑΤΑΔΥΣΕΙΣ, ΦΩΤΟΓΡΑΦΙΑ, ΟΙΚΟΛΟΓΙΑ, ΠΑΡΕΑ !
Τώρα είναι 28 Μαρ 2024, 12:22

Όλοι οι χρόνοι είναι UTC + 2 ώρες




Δημιουργία νέου θέματος Απαντήστε στο θέμα  [ 3 Δημοσιεύσεις ] 
Συγγραφέας Μήνυμα
 Θέμα δημοσίευσης: 3D printing your aquarium parts
#98556 Δημοσιεύτηκε: 07 Αύγ 2013, 05:58 
Χωρίς σύνδεση
New member (10+)
Άβαταρ μέλους

Εγγραφή: 17 Σεπ 2011, 18:27
Δημοσιεύσεις: 48
Τοποθεσία: Santa Monica, California, USA
Has thanked: 1 time
Been thanked: 4 times
Experience in Years: 6
Type of Aquarium: Medium (100-500)
3D printing your aquarium parts

For those of you serious DIY folks, you may be interested in how you can make your own plastic aquarium parts by printing them on a 3D printer. Just this year, costs for the 3D printers have dropped to under $500 USD for a pre-built one, and under $200 USD for a kit. 3D printing of your plastic parts works well when:

1. You are good with computers.
2. You like trying new designs or colors.
3. The part is small, or can be put together with small parts.
4. The part does not require great strength.
3. There is no easier/cheaper way to get the parts.

Some aquarium parts, such as simple boxes or tubes, are not suited to 3D printing because they can be more easily made with simple plastic or acrylic shapes. But some parts are so complex that there is no other way to make them except to print them on a 3D printer. I'll be using 3D printers to make the next version of algae scrubbers because of the built-in air tubing, magnet compartments, holes, and bubble pathways that make it impossible for the part to be made (in one piece) any other way.

Some things I've learned that pertain especially to 3D-printed aquarium parts:

1. Only use ABS plastic, not PLA or PVA. The ABS plastic is the same type of plastic used in kid's LEGO toys and is very strong. PLA or PVA plastic, however, will slowly dissolve when underwater or when subjected to high temps.

2. Only use FDM (also called FF) printers. These are the types of printers which use coils of plastic filament. These are also the cheapest printers. Other types of printers such as SLA (liquid) use a photo-cured plastic that will get brittle under aquarium lights, and "powder-printers" make parts which are not water tight.

3. The 3D printed parts will not be "glossy smooth". They will instead be more like carbon fiber, with a texture (or lines) running in one direction through the whole part.

I'm too new at 3D printing to be able to recommend a particular printer, but I'm sure each reef or aquarium club has someone who has a 3D printer, and this is usually a great place to start.

Happy printing!

_________________

Θρεπτικά μετακίνηση συζήτηση: Algae Scrubbers
ξέρα μελέτες: ReefBase :: Main Publications


Κορυφή
 Προφίλ  
 
 Θέμα δημοσίευσης: Re: 3D printing your aquarium parts
#98656 Δημοσιεύτηκε: 21 Αύγ 2013, 05:37 
Χωρίς σύνδεση
New member (10+)
Άβαταρ μέλους

Εγγραφή: 17 Σεπ 2011, 18:27
Δημοσιεύσεις: 48
Τοποθεσία: Santa Monica, California, USA
Has thanked: 1 time
Been thanked: 4 times
Experience in Years: 6
Type of Aquarium: Medium (100-500)
Summary of 3D printing links:

Endless things to print:
http://www.thingiverse.com/

General forum for all printers:
https://groups.google.com/forum/#!forum ... cksreviews

Massive forum for lots of printer kits and DIY:
http://forums.reprap.org/

Current lowest-cost assembled printer to print aquarium-safe ABS plastic:
http://www.kicktraq.com/projects/pirate ... e-can-use/

Current most popular U.S. based assembled printer:
http://makerbot.com/

Low cost Chinese clone of Makerbot:
http://www.ff3dp.com/

Another low cost Chinese clone of Makerbot:
http://www.wanhao3dprinter.com/

_________________

Θρεπτικά μετακίνηση συζήτηση: Algae Scrubbers
ξέρα μελέτες: ReefBase :: Main Publications


Κορυφή
 Προφίλ  
 
 Θέμα δημοσίευσης: Re: 3D printing your aquarium parts
#98722 Δημοσιεύτηκε: 30 Αύγ 2013, 00:27 
Χωρίς σύνδεση
New member (10+)
Άβαταρ μέλους

Εγγραφή: 17 Σεπ 2011, 18:27
Δημοσιεύσεις: 48
Τοποθεσία: Santa Monica, California, USA
Has thanked: 1 time
Been thanked: 4 times
Experience in Years: 6
Type of Aquarium: Medium (100-500)
Here's my attempt at getting some printers for aquarium parts:
http://www.kickstarter.com/projects/107 ... n=347e500b

_________________

Θρεπτικά μετακίνηση συζήτηση: Algae Scrubbers
ξέρα μελέτες: ReefBase :: Main Publications


Κορυφή
 Προφίλ  
 
Τελευταίες δημοσιεύσεις:  Ταξινόμηση ανά  
Δημιουργία νέου θέματος Απαντήστε στο θέμα  [ 3 Δημοσιεύσεις ] 

Όλοι οι χρόνοι είναι UTC + 2 ώρες


Μέλη σε σύνδεση

Μέλη σε αυτή την Δ. Συζήτηση: Δεν υπάρχουν εγγεγραμμένα μέλη και 5 επισκέπτες


Δεν μπορείτε να δημοσιεύετε νέα θέματα σε αυτή τη Δ. Συζήτηση
Δεν μπορείτε να απαντάτε σε θέματα σε αυτή τη Δ. Συζήτηση
Δεν μπορείτε να επεξεργάζεστε τις δημοσιεύσεις σας σε αυτή τη Δ. Συζήτηση
Δεν μπορείτε να διαγράφετε τις δημοσιεύσεις σας σε αυτή τη Δ. Συζήτηση
Δεν μπορείτε να επισυνάπτετε αρχεία σε αυτή τη Δ. Συζήτηση

Μετάβαση σε:  
cron

TapaTalk Enabled


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

Ελληνική μετάφραση από το phpbbgr.com