OPEN REEF - ΤΟ ΕΙΔΙΚΟ ΦΟΡΟΥΜ ΓΙΑ ΕΝΥΔΡΕΙΑ ΥΦΑΛΩΝ

χαιρετώ!

Πήγα σήμερα για να πάρω κάποια πραγματάκια που ήθελα για το ριφακι μου και μεταξύ αυτών και ενα αλατι , ξεκίνησα με το σκεπτικο οτι θα πάρω το ΤΜ προ ριφ το οποίο και χρησιμοποιώ εδω και ενα χρόνο , έπεσα όμως πάνω σε μια παλια προσφορά και πήρα τελικά το Grotech Coral Marine Reef Salt το οποίο είχε δώρο 2 σκευάσματα Mg και Ca και η τιμή ήταν πολύ χαμηλή!

Θα ήθελα να μου πείτε τη γνώμη σας για το συγκεκριμενο αλατάκι εαν το έχει δοκιμάσει κάποιος από εσάς!

Product-No.: 00182
CoralMarine Salz 100 Liter Marine Water
Premium Quality Reef Salt HS-Code 25010099
CoralMarine Reef Salt contains a lot of vital important trace-elements and micronutrients required by a lot of corals, invertebrates and fishes.

CoralMarine Reef Salt is produced from first-class chemicals in pharmaceutical quality.

In order to be able to use CoralMarine Reef Salt for all types of exit water, we decided to add a part of Calcium and Magnesium separately in liquid condition.
Thus you have the possibility to adapt those two values optimally to your exit water, so that you can always adjust by yourself the necessary value required by your aquarium.

After dissolving in membrane diffusion water, CoralMarine Reef Salt contains up to 1100 mg/l Magnesium and 370mg/l Calcium. This value is to be understood without having added the two liquid components.

When using membrane diffusion water you can increase by means of the Magnesium-component the Magnesium value in the fresh salt water up to 1350mg/Liter and with the Calcium-component the Calcium value up to 430mg/ Liter.



Operating Instructions:
- Temper exit water to 23° - 25°C (73,5 – 77°F).
- Care for enough water movement in the water tank by means of a pump.
- Do not use an air vent for water movement.
- Please dissolve the appropriate amount of salt in the water. NEVER add the water to the salt.
- After dissolving please check the density of the salted water mixed a new.
- In order to speed up dissolving, 1 ml carbonated mineral can be added per liter salt water, thus
the pH-value adjusts itself much faster.
- After the salt is solved entirely, the water can be used immediately. A "pre-ageing", how it is partly
recommended with other salts, is not required.
- We recommend a salinity from 33-34 %o or a density of 1021-1022 g/l with 25°C (77°F)
- The fluid components should be added directly to the aquarium after the water change has been carried out. Possible precipitations are avoided thereby.